J.BAUER Electronics LaserBee™
International Buyers Only
Tests most Lasers from 1mW to 5200mW output power. Displays resolution in 1mW increments to 5200mW.
Our highest power hobbyists entry level Analog Laser Power Meter aptly named LaserBee™ AX3 for (A)nalog (X)tended (3) third iteration. It uses a Thermopile Sensor head with a new broadband coated sensor and comes pre-calibrated against a NIST traceable Coherent FieldmaxII Lab LPM.
The higher power is due to our latest newly formulated Broadband coating on the Thermopile Sensor that can accept up to a true 5200mW of laser power without degradation or damage..
Just shine your 4mm or larger diameter Laser beam onto the large 15mm X 15mm Sensor and read the power directly on the large LED Display. It is to be noted that the size of the Laser beam diameter does not affect reading accuracy but does affect Power Density.
Featuring a true Zeroing control to zero out the readings from random external heat sources if they are in the vicinity of the test area to assure accurate readings.
Power comes from a standard 9 Volt battery available anywhere. Power consumption is so low that a fresh alkaline battery can power the LaserBee™ AX3 for up to 36 hours non stop.
Specifications
Power Supply: ................................. 9Volt Battery
Sensor: ............................................. Thermopile (by J.BAUER Electronics)
Sensor Area: ................................... 15mm x 15mm (225 square mm)
Sensor Cable Length: .................... 18.0"
Thermopile Head Dimensions: ... 1.65" x 1.50" x 1.00"
Power Range: ................................. 1mW to 5200mW
Spectral Range: .............................. 300nm to 1500nm
Response Time (100%): ................ 30-40 Seconds
Response Time (90%): .................. 14-16 Seconds
Display Resolultion: ....................... 1mW
Power consumption: ..................... 14 milliamps @ 9vdc
Total Dimensions: .......................... 4.00" x 2.50" x 1.50"
Copyright © 2008-2024 J.BAUER Electronics All Rights Reserved.